Click To Call(656) 254-1439Click To Get A Free Estimate
Brick paver driveway in front of an Apollo Beach home

Richer color, tighter joints and easier upkeep

Paver Sealing in Apollo Beach, FL

Call (656) 254-1439 for a free paver sealing estimate on your Apollo Beach driveway, pool deck or patio.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.00 to $1.75 a sq ft to clean, sand and seal
Call Now(656) 254-1439

How fast can I get paver sealing in Apollo Beach?

You can get paver sealing in Apollo Beach, FL from a local contractor, and you will hear back within 1 business day, usually much sooner. The estimate is free and carries no obligation. To start, call (656) 254-1439.

Sealing deepens faded color, helps the joint sand stay put and makes pavers easier to rinse clean. The drive you turn into after work looks looked-after again, and the seams hold fewer weeds. A driveway deals with tires and oil, while a pool deck deals with splashes and bare feet. Mention how every spot gets used, from parking to barefoot lounging, when you ask for a free estimate.

Call (656) 254-1439

Contractors applying sealer to a paver driveway with a sprayer and roller
What's included

What is included in a paver sealing job?

Expect four parts in a sealing visit: a look at the surface, a wash, new joint sand and the sealer itself. The wash comes first because sealer locks in whatever is underneath it. To hear how these steps apply to your pavers, call (656) 254-1439.

Inspection

The contractor looks for sunken sections, failed old sealer and stains, and watches how water leaves the surface.

Washing

Algae, dirt and residue come off first. A coat laid over the dirt seals it in.

Joint sand

Sand goes back into the seams, tying the pavers together and giving weeds little room.

Sealer

The product goes onto a dry surface at the spread rate printed on its label.

When do pavers need sealing?

Pavers need sealing when color has faded, joints have lost sand or water no longer beads on an older coat. With sand gone, weeds root in the seams and the stones begin to move, and fixing that runs higher than a plain maintenance coat. To have yours looked at, call (656) 254-1439.

What type of paver sealer works for Florida homes?

No single type suits every Florida home, and installers disagree about which holds up better in humid air. Have the contractor name the sealer and say why it was picked. To talk it through, call (656) 254-1439.

Water-based products have a mild smell, clean up easily and can be followed later by either type. Solvent-based products smell stronger and usually give more gloss and deeper color, but they generally need solvent-based products afterward. Ask what each choice would mean for your pavers when you ask for a free estimate.

Should I choose a wet look or a matte finish?

Choose wet look for deeper color and shine, and matte to stay close to the original look. Wet look shows scuffs sooner and can feel slicker when wet, so a busy driveway or a pool deck may suit a lower sheen. Ask to see a sample of each finish when you ask for a free estimate.

How often should pavers be sealed in Florida?

Plan on resealing every two to five years, the range paver companies in Florida commonly quote. Full sun, sprinklers and daily car traffic push toward the short end, and covered areas last longer. A coat that lets splashed water sink in rather than bead is likely wearing thin. To have it checked, call (656) 254-1439.

Does more sealer mean more protection?

No. A thick or uneven coat can leave haze and lap marks, and extra coats add cost without adding years. Be careful with any offer built around heavy coverage, and ask what coverage the maker calls for before you ask for a free estimate.

When is the right time to seal pavers?

The right time is a dry stretch after the pavers have fully dried from washing. Unilock, a paver manufacturer, says pavers in warm, sunny climates can be dry and ready within a few hours of cleaning. Alliance Gator, a sealer maker, offers at least 48 hours of drying as a rule of thumb. For newly laid pavers, mention the month they went in when you call (656) 254-1439.

New pavers have their own wait. Brickworks, a paver maker, puts the fade of white efflorescence at two to three months and sometimes up to a year, and sealing over it traps it. In Apollo Beach the rainy season runs from late May to early October, so many homeowners aim for a gap between storms. To line up a date, ask for a free estimate.

Will sealing fix sunken pavers?

No. Sealing does not lift pavers that have sunk or pulled away from the edge. Low or loose sections have to be reset first, so find out whether the quote covers that. Joint sand is sold in several shades, and one near the color of your pavers hides the seams most. Bring up both when you ask for a free estimate.

Surfaces

Which paver surfaces can be sealed?

Sealing works on driveways, pool decks, patios and walkways alike. Each one wears in its own way, so the plan should fit how the area is used. To start with yours, ask for a free estimate.

Driveways

Driveways take tires, oil drips and the longest hours of sun. Sealing one keeps the color even and the joints full so the pavers stay locked under a parked car.

Pool decks and lanais

A pool deck is splashed, walked on barefoot and rinsed with chlorinated water. Sealing one should leave a surface that still drains and does not turn slick.

Patios

A patio beside a fence or a screen enclosure stays damp and collects leaves. Sealing one is mostly about lifting the green film and slowing its return.

Walkways and entries

Entry walks collect mulch, dirt and sprinkler runoff. Sealing one is a small job, and it is the first surface a guest steps on.

Common problems

What paver problems are common in Apollo Beach?

Five problems come up often in Apollo Beach: sun fade, green film, lost joint sand, sprinkler streaks and failed old sealer. To have yours looked at, call (656) 254-1439.

1. Color baked out by the sun

Apollo Beach got its name, by local legend, from the area's sunshine. Unprotected pavers feel that sun all afternoon, and an open driveway fades first.

2. Green film in damp corners

Shade, bay air and sprinklers keep some pavers wet, and algae follows. It turns slick, which matters most on a pool deck and a front step.

3. Joint sand carried off by summer rain

Heavy storms flush sand out of the seams. With the joints low, pavers can shift and weeds take hold, so new sand goes in before sealer.

4. Streaks from irrigation

A sprinkler head that hits the same edge every morning leaves orange or gray marks. They need their own treatment first, or the sealer locks them in.

5. Old sealer that clouded or flaked

A coat that trapped moisture can go milky or peel in patches. It has to be dealt with before anything new goes down.

Pricing

What does paver sealing cost in Apollo Beach?

Rusty's Pro Wash and Seal, a Tampa Bay company, publishes $1.00 to $1.75 per square foot for paver sealing. Price follows square footage first, then condition. Deep stains, sunk areas and a failed older coat all add labor. For a real number at your own address, ask for a free estimate.

Prefer to start with the wash? See the guide to paver cleaning and joint sand, and the list of areas served near paver sealing in Apollo Beach.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$300 to $525
600 sq ftTwo car driveway$600 to $1,050
1,000 sq ftLarge driveway or pool deck$1,000 to $1,750
1,500 sq ftDriveway plus pool deck$1,500 to $2,625

Math based on the $1.00 to $1.75 per square foot that Tampa Bay paver companies publish. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Paver pool deck beside a screened pool
Why choose us

Why use a local contractor for paver sealing?

A local contractor already works in the same sun, storms and bay air your pavers face. Ask for the price in writing, then take as long as you like to decide. To get started, call (656) 254-1439.

A contractor used to bayfront conditions

A local contractor has already worked on pavers in damp, salty air and sandy ground. Your first visit starts further along because of it.

A price with no pressure

Any deal is made directly with the contractor, and you can say no to the number. The estimate itself is free.

A published range to check against

Tampa Bay companies post their per square foot rates, and this site shows them. A bid far outside that range deserves a second question.

You set the pace

Get the price on paper and read it over at your own speed. The contractor standards page shows what to confirm before you agree.

How do I get a free paver sealing estimate?

Call, or send the short form, and a reply arrives within 1 business day, usually much sooner than that.

Call (656) 254-1439

Free, no obligation

Tight view of sand-filled seams on freshly sealed pavers
Photos

How do pavers look after sealing in Apollo Beach?

Freshly sealed paver driveway at an Apollo Beach home
Sealed paver pool deck at an Apollo Beach home
Sealed paver patio behind the home at an Apollo Beach home
Sealed paver walkway to a front door at an Apollo Beach home
Close view of freshly sealed pavers at an Apollo Beach home
Paver area with one cleaned half beside a dirty half at an Apollo Beach home
Contractor cleaning pavers at an Apollo Beach home
Contractor sealing or sanding pavers at an Apollo Beach home
How it works

How does the paver sealing process work?

Five steps make up the paver sealing process, starting with a look at the surface and ending with a walk-through. To get on the schedule, call (656) 254-1439.

1. Measure and look

The contractor measures the area for the sealing price and notes dips, loose pavers, old sealer and any place water collects.

2. Cover and wash

Plants, screens and the garage door get covered and the sprinklers are shut off. A rotary surface cleaner then washes at a gentle pressure so the joint sand stays put.

3. Treat the stains

Rust, algae, leaf marks and white salts each get their own cleaner, tried on a small patch first.

4. Refill the joints

When the surface is dry, fresh sand is brushed in, settled and topped off, and stray grains are blown away.

5. Seal, then walk it with you

When sealing is in the plan, the product is applied in thin passes with a sprayer, then rolled. Afterward the contractor tours the finished area with you and says when feet and cars can return.

Questions

Frequently Asked Questions

How often should pavers be resealed in Florida?

Paver companies in Florida commonly quote two to five years. Strong sun, sprinkler overspray and daily car traffic push toward the short end, while a covered lanai can go longer. When splashed water darkens the stone and sinks in, the coat has thinned, and that is your cue.

Why is paver sealing so expensive?

Labor for prep outweighs the cost of the sealer. A full job covers washing, stain treatment, joint sand, drying time and thin coats in order. Stripping failed sealer or leveling sunken pavers adds hours, so ask each bidder what the number includes.

What is the average cost to seal pavers in Florida?

Rusty's Pro Wash and Seal, a Tampa Bay company, publishes $1.00 to $1.75 per square foot. For a 600 square foot driveway in Apollo Beach that comes to about $600 to $1,050. Repairs and old sealer removal usually cost extra.

What are the downsides of sealing pavers?

The main one is the repeat cost. A glossy finish can feel slick on a wet pool deck and shows scuffs sooner. Sealer laid over damp pavers can haze, so a dry day matters.

Do I need a license to pressure wash in Florida?

It depends on the work, so ask the contractor which license or registration applies. The Florida Department of Business and Professional Regulation runs a public license search. The contractor standards page on this site lists what to ask for.

What do professionals use to seal pavers?

Most use a water-based or solvent-based sealer, applied by sprayer, roller or both. Water-based products smell milder, and solvent-based ones usually give more gloss. Ask which one the contractor plans to use and why.

How long should you stay off pavers after sealing?

Plan on a day for feet and a little longer for cars. Ask the contractor for the exact times for the product used, since each sealer cures on its own schedule.

Is it okay if it rains after sealing pavers in Apollo Beach?

Not right away. Alliance Gator, a sealer maker, offers a rule of thumb of at least 48 hours of drying. With a rainy season from late May to early October, contractors here watch the forecast and move the day when storms are likely.

Can pavers beside a canal or pool in Apollo Beach be sealed?

Yes. Pool decks, lanais and canal-side patios are sealed all the time. Ask what product the contractor suggests for a surface that stays wet and is walked on barefoot, and whether a slip-resistant additive is an option.

Ready for pavers that look cared for?

Send the short form or call, and a local contractor replies within 1 business day, usually much sooner than that.

Call (656) 254-1439

Free, no obligation